Polycarbonate solid sheet

Aviation transparent container, motorcycle front windshield, aircraft, trains, ships, cars, powerboats, submarines and glass gendarmerie shield
Aviation transparent container, motorcycle front windshield, aircraft, trains, ships, cars, powerboats, submarines and glass gendarmerie shield

Product Features

Size: 1.22*2.44m, other sizes can be customized

Thickness: 0.5mm~25mm, other thicknesses can be customized

Color: transparent, brown, green, blue, gray, milky white, etc., other colors can be customized

Product advantages

Impact resistance: high impact strength, impact resistance, unbreakable, strength more than tempered glass, tough and safe, anti-theft and bulletproof effect.

Hotline: +86 13771984716
Product Details
  • Specification
  • Features
  • Application
  • FAQ
  • Impact resistance: the impact force of the endurance plate can reach 3kg/cm, the impact strength of the PC endurance plate is 250-300 times that of ordinary glass, 20-30 times that of acrylic sheet, 2 times that of tempered glass, and there is almost no risk of fracture. With 3kg hammer two meters down without cracks, there is bulletproof glass "and" sound steel "reputation. These characteristics greatly reduce repair costs and liability risks compared to other window glass materials throughout the service life.

    Weather resistance: there is a UV-proof co-extrusion layer on the surface, which can prevent the fatigue of the resin caused by the ultraviolet rays of the sun. The surface co-extruded layer has chemical bonds to absorb ultraviolet light and convert it into visible light, which has a good stabilizing effect on plant photosynthesis. Maintain the stability of physical indicators in the range of -30 ° C to 120 ° C. After 6000 hours of artificial weathering test, the yellowing degree is 2, and the transmittance decreases by only 0.6%. Will not cause deformation and other quality deterioration. PC board does not occur cold and brittle at -30 ° C, does not soften at 137.3 ° C, and has no significant changes in its mechanics and mechanical properties in the harsh environment.

    Flame resistance: The endurance plate itself does not spontaneously ignite and has self-extinguishing. In line with the EU ROHS directive and strict UL safety specifications, UL94 fire rating reached VO level, V2 level, HB level. PC board itself ignition point is 580 degrees Celsius, from the fire after self-extinguishing, burning will not produce toxic gases, will not contribute to the spread of fire potential.

    Light and hard: light weight, only half of the glass, 1/3 of the acrylic plate, good adaptability and safety, easy to handle, drill and cut off. During installation, it is not easy to break, and the construction and processing are simple. In addition, the parts made of this product are lighter and have better performance than glass of the same size, so they can save space.

    Plasticity: It can be installed into arched, semi-circular roof and window by cold bending in the site according to the design. The minimum bending radius is 175 times the thickness of the plate, and it can also be hot bent.

  • Sound insulation: The sound insulation effect of PC board is obvious, and the sound insulation of PC board is better than that of glass and acrylic board of the same thickness, and the sound insulation of PC board is 3-4DB higher than that of glass under the same thickness conditions. Internationally, it is the preferred material for highway noise barriers.

    Environmental protection and energy saving: cool in summer, heat preservation in winter, PC board has a lower thermal conductivity (K value) than ordinary glass and other plastics, the heat insulation effect is 7%-25% higher than the same glass, and the heat insulation is 49% higher. Thus, the heat loss is greatly reduced, and it is used in buildings with heating equipment, which is an environmentally friendly material.

    Anti-condensation: When the outdoor temperature is 0°C, the indoor temperature is 23°C, and the indoor relative humidity is lower than 80%, the inner surface of the material is not condensation.

Leave us a message