The following with Suzhou Zhuoni sun board to see what the misunderstanding of the sun board are!

1, only rely on the senses to judge the quality of the sunlight board

Many sun board needs users to select the sun board when the method used is wrong, the common wrong way is to pinch the board by hand, weigh the method, if very heavy is not collapse is to show that the sun board is very good, in fact, this is a big mistake. Whether the sun board has the bearing capacity is an important indicator to measure the quality of the sun board, and the bearing capacity is not only related to the thickness and hardness, but also related to the production of raw materials and processes, so it is not correct to judge the quality of the sun board by weight and hardness alone.

2, UV layer, anti-fogging layer can be self-identified

Ultraviolet light is a key factor leading to the aging of the plate, so now more and more producers choose to co-extrude the UV layer (UV layer) sunlight board. The UV layer of the good quality sunshine board can not be measured only by the thickness, but also by the uniformity of its co-extrusion, to choose the UV layer thickness and good uniformity of the sunshine board.

The identification of the anti-drip sun board is actually very simple, that is, take a cup of hot water under the board, if the condensate water forms droplets or water droplets on the lower surface of the board, it indicates that the anti-drip effect is not good.

3. Deceived by the illusion of warranty

With the increasingly fierce market competition in the sunshine board industry, many manufacturers have shown the "quality guarantee" sign, and many users see the "quality guarantee" and relax their vigilance to buy products. Remind everyone that when buying, you should ask the manufacturer clearly: within the warranty period, the yellow index and light transmittance of the sunlight board are how much. For example, during the 10-year warranty period, the yellowing index will not change by more than 10, and the transmittance will not decrease by more than 6%.

4, the installation construction is negligent

Choosing a good quality sunlight panel is only the first critical step, and installation is an even more critical step. Edge banding and punching are the key factors that determine the quality of the installation technology of the sun panel. If the installation process is not installed, then it will damage the service life of the sunshine board, so the installation process must not be taken lightly.

I hope that you will not be misled in the process of buying the sunshine board, be sure to carefully identify and choose a good quality PC sunshine board!