Third: Many people will pay attention to its monofilament quality in the whole process of using PC endurance board, and if the monofilament quality is not good, it will also cause certain damage to the work. Therefore, we all want to be able to quickly distinguish whether its quality is qualified, and then we can train and learn several methods that I share resources for you.

The quality of the PC endurance plate is closely related to the quality of the monofilament, and the relevant PC endurance plate monofilament quality standards clearly point out certain requirements, only meet the necessary conditions of such requirements can be regarded as qualified, can be used in the production and processing of the PC endurance plate.

One of the indicators to consider the quality of PC endurance plate monofilaments is its particle size, different raw materials of PC endurance plate monofilaments, its particle size requirements and the reason for the error allowed at this level are not the same. Secondly, the appearance is also an important factor to distinguish whether the quality of PC endurance plate monofilament is qualified.

PC endurance board

The quality of high-quality PC endurance plate monofilaments should be lubricated and tender, and the basic average color; It does not contain all the sediment, bubbles and cracks and other defects; Of course, it is not allowed to have all the mess or undivided yarn yarn penetration, otherwise it will also reduce the quality of PC endurance plate monofilament.

The disconnection of the PC endurance plate monofilm needs to be tied to be sustainably tightly around, and the middle interval of the two disconnections should not be less than meters. In addition, considering that the size is an important expression of the particle size of PC endurance plate monofilms, it is necessary to pay more attention to this level.

To master, the elements that harm the size of the PC endurance plate are the diameter and proportion of the monofilament. When accurately measuring its densification, generally take the meter without joint monofilms, and dry for hours, use the electronic analytical balance to weigh accurately to the third place after the decimal place, so as to obtain the necessary results, and then distinguish the quality of PC endurance plate monofilms.

These are several methods that can quickly distinguish whether the quality of PC endurance plate monofilament is qualified, and I am sure that many people have mastered how to do it after reading it.