The quality advantage of the endurance plate produced by the technical professional enterprise has the characteristics of gao toughness and gao bending stiffness, but how about its load-bearing force? It is also based on a comprehensive analysis of various aspects of the elements, including the interface mode of the endurance plate, the thickness of the board and its commonly used raw materials.

In the specific application, there are three common interface methods of endurance plate, respectively, the decorative strip flat connection, U-lock and side embedment, in comparison, the decorative strip flat connection and side embedment of the endurance plate compressive strength will be weaker, and the U-lock will be better.

The thickness is also one of the key factors in the decision of the bearing capacity of the endurance plate, and the higher the thickness of the endurance plate, the greater the relative load. The raw materials of the endurance plate have a new upgrade material and raw materials, resulting in the loading capacity of the board is also different, the endurance plate manufactured by the application of raw materials is very easy to break, indicating that its bearing capacity is not high, and the new upgrade material is very little will produce similar problems, confirming that the bearing capacity is good.

At this stage, there are more PC endurance plate and PVC endurance plate on the sales market, their difference depends on the plate, the first kind of endurance plate is polycarbonate, and the second kind of plate is polyethylene, the characteristics of the endurance plate will be more and more different, but also includes the load capacity.

Because the relative density of PC endurance plate is lower than that of PVC endurance plate, the continuous application temperature is higher than that of PVC plate, so its transmittance is mainly manifested gengjia. The actual effect of sound insulation and noise reduction of PVC endurance plate is good, but because it is not resistant to aging, it can not be applied in the outdoor natural environment.

In general, PC endurance plate and is an excellent conductor and insulator raw materials, and PVC endurance plate is a good electrical performance of gao polymers, characteristics are not the same, the main use is not the same.